" />
RSS

40k Terrain: Imperial Command Post Part 1

CP 1 300x186 40k Terrain: Imperial Command Post Part 1

You may recall last week I introduced that my next 40k Terrain project would be an Imperial Command Post. I’m not a great artist, but here’s a conceptual drawing of what I hope to build. In case you can’t tell, I’ve got to add a few windows and a door. I want to put gun emplacements on the ends (as shown on the right side of the drawing). I plan on getting some sponson bits off Ebay for that. I’ll frame the windows and doors with card stock, and use wire for the antennas. The barbed wire around the entrance will be supported by sprue bits. I’ll show you how to make the barbed wire in the next post.

I did get started on the project today but cutting the MDF bases. I’m going to make two of these structures, as you can see from the two following pictures where I’m cutting out the general shapes. First, I traced out my general shape. I wanted to leave enough room on the bases to put some terrain (like the barbed wire). (Details for cutting MDF can be found in the 2nd Crater post.) Then I cut them out.  Their going to make great 40k buildings, and should be ideal for Cities of Death or Planetstrike.

CP 2 Sm 300x224 40k Terrain: Imperial Command Post Part 1 CP 3 Sm 300x224 40k Terrain: Imperial Command Post Part 1

Technorati Tags: , , , , ,

Tags: , , , , ,

Monday, October 11th, 2010 at 9:35 pm • 40k building, 40k terrain, planetstrikeRSS 2.0 feed • leave a response or trackback

Leave a Reply

Blog WebMastered by All in One Webmaster.